| Fidanza is a registered trademark of Fidanza Engineering Corporation Optima Batteries is a registered trademarks of Johnson Controls, Inc. |
| Fuel Pressure Gauge & Filter Kit Kit enables the installation of a fuel pressure gauge within the engine compartment, while maintaining an OEM appearance. Designed not to interfere with the factory fuel rail, the gauge connects directly to the suppled filter via a high temperature stainless steel braided line. Fits 1990-95 ZR-1. $275 (Kit is made to order. Please allow 2 weeks for delivery) |
| OEM Style Thermostats Custom fabricated OEM quality thermostats utilize factory bypass valve and spring. All units are individually tested to open within +/- 2 F of their rated temperature. Fits 1990-95 ZR-1. 145 F Call 160 F $120 170 F $120 |
Fact: During extensive testing of popular 180 F replacement thermostats, it was
discovered that many begin opening as much as 10 F above their rated temperature.
discovered that many begin opening as much as 10 F above their rated temperature.
| Aluminum Underdrive Pulley Set Billet aluminum underdrive water pump and alternator pulley are half the weight of OEM and slows the respective accessories 10%, resulting in a reduction in rotating mass and peristaltic drag. Proper electrical charge is maintained at idle. Durable black anodized finish. Includes replacement drive belt. Fits 1990-95 ZR-1. $245 |
| Aluminum Water Pump Pulley Billet aluminum water pump pulley is half the weight of the OEM steel pulley, yet maintains the stock diameter. Offered for those interested in reducing rotating mass without effecting factory established pump RPM. Durable black anodized finish. Fits 1990-95 ZR-1. $160 |
| Plenum Insulator Kit Low profile (1/8" thick) phenolic insulator plates are designed to assist in the reduction of plenum temperature, while minimizing the chance of plenum / hood interference. Plates incorporate a bypass port for proper coolant system venting. Kit includes plates, throttle body coolant bypass line, line plugs, and fasteners. Fits 1990-95 ZR-1. $125 |
| Throttle Body Insulator Plate Thin (1/16") phenolic insulator plate is designed to assist in the reduction the throttle body temperature while maintaining proper mounting location and throttle cable slack. Available for 60mm and 63mm applications. Fits 1990-95 ZR-1. $60 |
| Adjustable Trailing Arm Brackets Adjustable trailing arm brackets are designed for both strip and street applications. Variable mounting points enable a change in the vehicle's "instant center", allowing for greater downward force upon launch at the track and reduced "loose roll steer" on the street. Manufactured from heat treated A500 steel with a black enamel topcoat. Complete with custom length mounting hardware. Fits 1988-96 C4. $225 (Brackets are made to order. Please allow 2 weeks for delivery) |
| Magnetic Drain Plug Set Protect your investment with magnetic drain plugs. Complete set includes replacement drain/fill plugs for the engine, transmission, and differential housing. Plugs incorporate Alnico 8H magnets for maximum energy and temperature stability. Fits 1990-95 ZR-1. $60 |
| Extended Length Pressure Plate Bolts Custom length pressure plate bolts ensure adequate thread engagement (unlike OEM fasteners) when installing a Fidanza aluminum flywheel on an LT5. Complete with over-sized ground washers and bottoming tap, as additional thread cutting is required. For use with factory style pressure plate. Fits 1990-95 ZR-1. $100 |
| OPTIMA Battery Tray and Bracket Modified mounting tray and cruise control servo bracket enables the installation of a OPTIMA sealed cell battery. For use with OPTIMA RedTop battery P.N. 75-35 (not included). Fits 1990-95 ZR-1 / C4 $135 |
| Be sure to view the new products available on our "Related Vendors" page! |
| HD165 Thermostat Custom fabricated heavy duty 165 F thermostat is designed to target an optimal engine operating temperature of approximately 180 F*. Design enhancements include an insulated heat motor, solid wall valve guide, and machined bypass valve and spring seat, for improved durability and thermal efficiency. Fits 1990-95 ZR-1. $110 |
| ___________________________________________ |
| Targa Brace Product is currently undergoing evaluation and testing. Call for more information. |
* Results are dependant upon cooling system upgrades, condition, capacity,
and ambient temperature during evaluation.
and ambient temperature during evaluation.
| Billet Aluminum Fuel Filter Billet 6061-T6 aluminum high flow replacement fuel filter assembly. Rated at 60 gpm, the 1 micron replaceable synthetic element and stainless screening provides 20% more filtration than the OEM style filter, without restricting fuel flow. Filter housing has a durable red anodized finish. Supplied with insulated mounting strap and additional replacement element. Fits 1990-95 ZR-1. $160 |
| Remote Fuel Pump Switch Remote switch can be used to disable fuel pump during oil pump priming (start-up) or as an additional security measure to prevent vehicle theft. Simple plug-in installation utilizing the under-hood fuse distribution block. Mounts quickly using the supplied heavy duty hook and loop fastener. Fits 1990-95 ZR-1. $75 (Switch is made to order. Please allow 2 weeks for delivery) |
| Aluminum Power Steering Pump Pulley Billet aluminum power steering pump pulley is 30% lighter than the OEM steel pulley (for additional reduction in rotating mass) while maintaining the stock diameter. Pulley incorporates an independent steel hub for ease of assembly and to ensure a superior pump shaft interference press fit. Durable black anodized finish. Fits 1990-95 ZR-1. $160 (Optional installation kit available below) |
| ___________________________________________ |
| ___________________________________________ |
| ___________________________________________ |
| ___________________________________________ |
| ___________________________________________ |
| ___________________________________________ |
| ___________________________________________ |
| ___________________________________________ |
| ___________________________________________ |
| ___________________________________________ |
| ___________________________________________ |
| ___________________________________________ |
| ________________________________________ |
| ___________________________________________ |
| ___________________________________________ |
(630)-532-2738
 | |  | |  | |  | |  |
| ___________________________________________ |
| Power Steering Pump Pulley Removal and Installation Kit Universal kit for the removal of the OEM pulley and installation of our aluminum pulley. Kit includes specific components selected to assist in the installation of the steel hub. $50 |
| Header Installation Kit Intended for use with 3/8" flange headers, this kit includes stainless steel SHCS fasteners, washers, studs, and straps, EGR tube plug, and oxygen sensor harness extensions. Fits 1990-95 ZR-1. $135 |
> Temporarily out of stock <
> Coming soon <
| The Buy Now option is intended for single item purchases For multiple products or international orders, please e-mail or call |
